Your new PS5 just arrived and you're shaking with excitement! The day has finally come when you've cleared your schedule so you can play the latest games on your Vizio TV.
Plug one end of the HDMI cable into the PS5 and the other into the Vizio TV and adjust the input, but the screen remains blank. Unfortunately, this is not the first time you have encountered this problem.
do not be afraid. This article is a one-stop solution to all your Vizio input problems. We'll show you what to do if your TV has input problems and how to fix them.
No time to waste, let's get started!
- Common input problems
- Detailed description of each solution
- 1. Try a different HDMI port
- 3. Try another device or original cable
- 4. There may be a problem with the input button on the remote control
- 6. Adjust the resolution of the laptop
- 7. Update the Vizio firmware
- 8. Reset your Vizio TV to factory settings
- 9. Contact Vizio Technical Support
- with the remote
- without a remote
- wrap things up
Common input problems
Please review the table below for possible solutions that you can try if you encounter any of the listed input issues. Then go to the next section for detailed instructions on each solution.
|My Vizio TV does not recognize the input (no signal)|
|My Vizio TV is stuck on one input / I can't change the input|
|My Vizio TV keeps changing inputs|
If you don't see the input problem listed above, or if the solutions don't solve your problem, try each of the troubleshooting tips below.
use:Solutions 8 and 9 should only be used as a last resort after trying all other solutions..
Detailed description of each solution
Now that you've identified possible solutions to your problem, let's learn how to implement them!
Follow the instructions below to resolve input-related issues.
1. Try a different HDMI port
Sometimes the TV port can be damaged and stop working. This will prevent your TV from recognizing the input source.
So it's best to try connecting the source device to a different HDMI port and see if that works.
Disconnect the external device from the TV's original HDMI port (note which port it uses for future reference), then connect it to a different port. Then change the input on the Vizio TV to reveal the new HDMI port.
If you succeed, you have found the culprit and you can start flashing the external device. Otherwise, move to the next recommended solution.
2. Disconnect all cables and perform a soft reset
Simple hardware failures can cause the Vizio TV to have difficulty recognizing external input sources or switching inputs.
Therefore, turning off all connected devices and restarting the TV may be the best course of action to resolve this issue.
step 1:Turn off your Vizio TV before disconnecting as many cables as possible (eg HDMI, power cable, VGA, etc.).
Step 2:After 30 seconds, reconnect all cables to the TV.
Step 3:Turn on the TV and check if it can display your input source.
use:If your source device has a USB power cable (eg Roku, Fire Stick, Chromecast), remember to use a USB power adapter to connect it to a wall outlet and not to the USB port on the TV. Using the TV to power the source device may result in the TV not recognizing it due to insufficient power.
3. Try another device or original cable
If you doubt that your TV port is working properly, it would be a good idea to check its functionality by connecting another source device or cable. Sometimes your source device or cable may be damaged, causing your TV not to recognize the connected source device.
step 1:Disconnect the source device and/or cable from the TV.
Step 2:Connect other source devices and cables to the TV and see the results.
If another source device or cable works with your TV, then you know the culprit is the original plug-in you're using.
4. There may be a problem with the input button on the remote control
If you're not sure how to change inputs on your Vizio TV without a remote, skip to the last section to learn how. If you can successfully change the input using this method, the problem could be a broken input button on the remote.
Try one of the following three troubleshooting methods.
1. Follow the steps below to clean the inside of the remote control.
- Before removing the batteries, remove the battery holder cover on the back of the remote control.
- If you don't see any screws on the battery holder, you should be able to open the remote control by sliding and turning a thin, sturdy object (eg, flat screwdriver, wine opener, metal nail file, etc.). Horizontal remote control slot.
- Separate the rubber keyboard on the remote from the case. Observe the conductive contacts on the rubber keyboard to ensure that the input key points are intact. Then wash the entire rubber keyboard thoroughly with mild soap and water. After washing and rinsing, make sure the keyboard is completely dry.
- Carefully clean the keyboard keys and contacts with isopropyl alcohol and a cotton ball. Then dry the keyboard with a clean paper towel.
- Next, it's time to clean the board with isopropyl alcohol and a clean cotton ball before drying.
- Reassemble the remote, pushing the housing to keep everything in place.
- Put a new battery in the battery holder, replace the battery holder cover and see the result.
Check out the video below that shows how to clean the inside of the remote control.
How to repair and clean the buttons on your remote control
2. Change the input on the Vizio TV without a remote (continued from the previous section).
3. Buy a replacement remote.
5. Check and replace the HDMI cable if necessary
As with everything in life, HDMI cables don't last forever. Your cable may be broken, missing pins, or have a damaged connector. Needless to say, this will prevent it from working properly.
So, say goodbye to your favorite AV cables and buy an efficient replacement.
we recommendAmazon Basic High Speed 4K HDMI kabelBecause it is high quality and durable.
6. Adjust the resolution of the laptop
When connecting a laptop to a Vizio TV, you need to make sure its resolution is compatible. So it's a good idea to check your laptop's output resolution and make sure it's compatible with your TV.
Follow the instructions below or read oursarticleLearn how to change the output resolution of your laptop.
Step 2:navigate toset.
Step 5:OpenScreen resolution.
Step 6:Select a supported resolution from the drop-down menu.
step 1:to goappleMenu.
Step 2:OpenSystem settings.
Step 5:to goscaly.
Step 6:Select a supported resolution.
7. Update the Vizio firmware
If you suspect that your Vizio TV's firmware is faulty, try updating it. This will clear any errors related to your TV's firmware and allow you to use the latest features.
to followinstructUpdate your Vizio TV below.
step 1:Press the Vizio TV remoteMenukey.
Step 2:search and openSystem.
Step 3:clickasks for updatesIf available, download and install it.
8. Reset your Vizio TV to factory settings
If you have cleaned or replaced all the components on the TV and the source device and you still cannot adjust the TV input properly, you may need to reset the TV to factory settings.
Although tedious, it's an effective way to ensure your TV doesn't break due to a software bug.
use:This process will delete data and apps from your TV, forcing you to go back and reinstall them.
with the remote
step 1:Click on the remoteMenubutton.
Step 2:lowtv settings, WillSystem.
Step 3:scroll down and selectReset and manage.
Phase 4:Click Factory Reset.
Step 5:In the pop-up menu, clickrestart.
Watch the video below to learn how to factory reset a Vizio TV using your remote.
Vizio Smart TV: How to Factory Reset to Original Factory Settings
without a remote
step 1:Find the control buttons on the back of the TV. Turn on the TV while pressing the buttonmute (-)AndA nurseuntil you see the message "Restore defaults" on the screen.
Step 2:then hold the buttonA nurse10 seconds or until the message "Erase memory" appears.
Step 3:Wait for the TV to restart before resetting.
Watch the video below to learn how to factory reset a Vizio TV without a remote.
Vizio Smart TV: factory reset without remote control (button on TV)
9. Contact Vizio Technical Support
Nothing goes as planned and there is no solution to your endless input problems on Vizio TV.
While we don't have additional troubleshooting tips, Vizio Technical Support can.
Note that the Vizio warranty usually only lasts for one year unless you've paid to extend it. If your warranty has expired, you may have to pay for the repair yourself.
Vizio Technical Support is available Monday through Friday (7:00am-11:00pm CST) and Saturday and Sunday (7:00am-8:00pm CST).
You can receive them via SMS205-301-3729.
they have anotherlive chatFunction.
Finally, you can call one of their qualified agents(844) 254-8087.
Be sure to give them your TV model and summarize the troubleshooting solutions you've already tried.
3 Easy Ways to Change Your Vizio TV's Input (With & Without Remote)
If everything is working correctly, changing the input on your Vizio TV should be easy!
If you lose or damage the remote, don't worry. You can change your entry without it, it couldn't be easier!
Let's learn how to adjust the input on your Vizio TV with or without a remote control in a few simple steps!
with the remote
step 1:find your remoteA nursekey and press it to displayA nurseMenu.
Step 2:Highlight and select the desired entry.
Step 3:You should now see your source device on the screen.
without a remote
Your remote is broken? no problem!
You can change the input on the TV without using the buttons on the TV or the Vizio Mobile app.
use the TV button
Find the control buttons for your Vizio TV on the back of the device. Here you should find aA nurseMulti-press button to switch between TV inputs.
Using the Vizio mobile app
The Vizio Mobile app (formerly known as the Vizio SmartCast Mobile app) can be used for control2015 or later.
To download this application, your smartphone must:
- Android 8.0 or later
- iOS 13.0 or later
After confirming that your smartphone is compatible with the app, follow the instructions below to install and use it with your Vizio TV.
step 1:Turn on the Vizio TV and make sure it's connected to the same Wi-Fi network as your smartphone.
Step 3:Log in to the app as a guest.
Phase 4:touchselect the device.If your TV and smartphone are connected to the same network, the app should find your TV within seconds.
Step 5:After the app finds your TV, tapbeginning.
Step 6:Select the name of your TV from the list.
Step 7:You should now see a 4-digit PIN on the TV screen. Type this PIN on the application keyboard.
Watch the video below to learn how to pair the Vizio Mobile app with your Vizio TV.
How to set up/pair the SmartCast Remote app with a Vizio SmartCast TV
Step 8:After installing the app, find and tap on the appA nurseAbility to adjust the Vizio TV input.
wrap things up
If you're having trouble changing inputs on your Vizio TV, you may need to try a few different solutions depending on the input problem. In most cases, it's a good idea to try a different HDMI cable/port, reboot and refresh the TV, and adjust the laptop's screen resolution.
In the worst case scenario, you may need to reset the TV to factory settings or contact Vizio technical support for further solutions.
Once you've resolved the input problem, you can change the TV's input using the input button on the TV's control panel or remote, or using the Vizio Mobile app.
What's your experience with troubleshooting input on your Vizio TV? Which of our solutions helped you solve the problem?
Let us know in the comments below!
Yesenia Achlim is a technical writer and editor specializing in audiovisual equipment. Their goal is to break down complex topics and make technology accessible, regardless of your technical background. When she's not teaching you how to change a projector bulb, you can turn to her for reading and baking.
- How to use Chromecast built in TCL TV? and…
- How to change language on Samsung TV with troubleshooting…
- How to connect AirPods to Smart TV? Along with troubleshooting...
- How to change LG TV aspect ratio, troubleshooting...
If you are connected to HDMI 1, press the Input key on your VIZIO remote, and use the arrow keys to select HDMI 1. If you are connected to HDMI 3, press the Input key on your VIZIO remote and use the arrow keys to select HDMI 3.Why is my VIZIO TV not recognizing HDMI input? ›
A faulty HDMI cable is one of the most common reasons why your Vizio TV doesn't pick up input signals from an external device. However, you'll need to do a bit of testing to see if the problem is with the following: HDMI wire. Your source device.How do I manually change the input on my VIZIO TV? ›
When you launch the app and have the TV powered on, you will see a few buttons on your mobile device's screen. Among the many buttons, you will see the Input button. Simply tapping on it will help you change the input source of your Vizio Smart TV without using your TV remote.Why does my TV say no input signal? ›
A "No Signal", "No Source", or "No Input" message will appear on your TV screen if the TV is not receiving a signal from your TV box. This is often a result of either the TV box being powered off, not being properly connected to the TV, or the TV being set to the wrong input.How do I get my TV to recognize HDMI input? ›
Make sure the TV is set to the correct video input to receive the HDMI signal. Most TV remotes have an Input button that cycles from one input to the next. Press the Input button repeatedly until the correct HDMI input is displayed on the TV. Be sure to check which input on the TV you are connecting to.Why is the TV not detecting HDMI? ›
If your TV is not finding an HDMI signal from the HDMI port, it may need an HDMI reset. To reset the television's HDMI, unplug both the TV and all other connected devices. Then, disconnect all of the HDMI cables from both ends and reconnect them. Lastly, plug in all of the connected devices to the power.What to do if TV is not recognizing HDMI? ›
Make sure the TV is set to the correct video input to receive the HDMI signal. Most TV remotes have an Input button that cycles from one input to the next. Press the Input button repeatedly until the correct HDMI input is displayed on the TV. Be sure to check which input on the TV you are connecting to.Why does my Vizio TV say no input signal? ›
You input may have been accidentally hidden. On newer VIZIO Models press the menu key on your remote. Choose System, and then choose Hide Input from List. You'll now a see a list of inputs- make sure that each input says Visible.What causes HDMI port to fail? ›
How you store your cable, such as coiling or bending it can damage the HDMI over time. Maybe you unplug and plug in the HDMI cable too roughly, because that can also damage the inputs. Even heavy use of the cables and devices it's connected to can cause the breakdown of the cable.Why won't my TV let me change the input? ›
Look behind your TV to see if there's an Ethernet or coaxial cable plugged into it. If so, try unplugging it from your TV, disarming the Hospitality Mode. Then, try changing your TV's input using the TV remote or the control panel.
Press the power button at the bottom/rear of the TV set. Press the input button. This will pull up a menu of your TV's display inputs. Use the mouse to select an input.How do I change the output on my Vizio TV? ›
- Settings > Audio.
- Settings > Audio > TV Speakers > Off.
- Settings > Audio > Surround Sound > On.
- Settings > Audio > Volume Levelling > Off.
- Settings > Audio > Digital Audio Out > Auto.
- Settings > Audio > eARC > On.
Right-click an input control. Click Reset. Optional: If you want to reset the input control automatically when you refresh the document, check the Reset on refresh checkbox in the Choose Control Type.What input does my TV need to be on? ›
The most important port on your new TV will be the HDMI port, which supports high-quality audio and video. Without this vital connection, you won't be able to connect a streaming device to your TV.How can I check if my HDMI port is working? ›
- Type troubleshooting in the search bar.
- Select Troubleshooting.
- Select View all on the top left corner.
- Click on Hardware and Devices.
- Follow the on-screen instructions to run the troubleshooter.
- Check if issue persists.
Connect your antenna coaxial cable to the “Antenna In” jack on the back of your digital tuner box. Use a second coaxial cable to connect the “Out to TV” on the digital tuner box to the “Antenna In” on the back of the TV. Set the TV to Channel 3 or 4 as indicated on the back of your digital tuning device.Should my TV be on hdmi1 or hdmi2? ›
The labels are only there so that when you switch between input sources on your TV, you'll be able to tell what port represents your desired source. Set your TV on HDMI 1 if your input device is in the HDMI 1 port. If the input device is on the HDMI 2, set your TV on HDMI 2.How do I enable HDMI input? ›
- Locate the HDMI port on the TV.
- Acquire a cable that fits the ports on both devices.
- Connect the cable from one device's HDMI port to the other.
- Use the Source or Input button on the TV to switch to the port.
- Configure video and audio on the device if needed.
The most common course for a problem is a bad connection between the HDMI cable and the device. This is common if you are plugging and unplugging the cable regularly.Do HDMI ports wear out? ›
The port can wear out over time. Depends on quality of the HDMI cable for example if one was very hard to plug in it can damage the port quickly. Also take note that unplugging and plugging it while it is switched on a lot in short succession will kill the HDMI chip over time in my cases it took a few minutes.
The VIZIO Mobile App allows you to control your TV from your Mobile device. With the VIZIO Mobile app you can also browse and discover movies, TV shows, music, live streams, and more across multiple apps at once!How do I change the input on my Vizio TV without the remote? ›
You can do this with the buttons on the TV. In most cases, the required buttons are located on the side of the TV. Clicking on the Menu button will take you to the OSD screen. To move left and right on the screen, you will need to use the volume buttons.How do I get to the menu on my Vizio TV without the remote? ›
- Download the Vizio SmartCast app from Google Play or the iOS App Store. Open the app on your mobile device.
- Tap the Control icon. Select Devices and choose your TV from the list that appears.
- The control menu that appears operates like a normal remote.
Pulse-Code Modulation is an audio technology that you can use with your Vizio TV. PCM is designed to give more resonant sound when you use it with a surround sound system. It is important to know how PCM works so that you can compare it to other audio technologies, such as Dolby Digital.What should VIZIO TV settings be? ›
We recommend leaving the Contrast to '50', Color at '50', Tint at '0', and Sharpness at '0'. We selected the 'Warm' Color Temperature as it's closest to our calibration target of 6500K. If you prefer a warmer or cooler image, you should adjust this setting to your preference.Why is my input button on my Vizio remote not working? ›
Remove the batteries from the remote. Press every button on the remote at least one (1) time. This also helps to check for stuck buttons. Re-insert the batteries back into the remote.Why does my Vizio TV say no input? ›
Reboot Your Vizio Smart TV
Wait for a few seconds for the TV to simply soft reset itself. After a good ten seconds or so, you can plug the TV back in and switch it on. Now switch to the input source to where your TV Channels or Streaming device is connected to. It should work fine right away.
Make sure the TV is set to the correct video input to receive the HDMI signal. Most TV remotes have an Input button that cycles from one input to the next. Press the Input button repeatedly until the correct HDMI input is displayed on the TV. Be sure to check which input on the TV you are connecting to.How do I fix my TV input without a remote? ›
Press the power button at the bottom/rear of the TV set. Press the input button. This will pull up a menu of your TV's display inputs. Use the mouse to select an input.Should TV be set on hdmi1 or hdmi2? ›
The labels are only there so that when you switch between input sources on your TV, you'll be able to tell what port represents your desired source. Set your TV on HDMI 1 if your input device is in the HDMI 1 port. If the input device is on the HDMI 2, set your TV on HDMI 2.
The TV input control automatically changes the input source to your Fios® TV set-top box when you press the STB button on your Fios remote or set-top box.